Tips on choosing furniture

Quite a new method of finishing the walls to be made to its lining and lining various panels. With the development of construction technologies, lining the walls of the panels is becoming increasingly popular. The walls of the room can be obshit plastic, wood, gypsum board and MDF panels.
More often than not lining the wall panels apply if the wall palpably rough. However, practical, convenient and attractive wall panels leads to use them even when the wall perfectly. If the surface roughness of walls, the following convenient way to cover the wall panels. At iron or plastic construction sets bar, these are flaws in hiding. The cheapest is lining the walls of the panels of gypsum board, but lagging MDF, wood and plastic sheeting will be more expensive.

Indisputable advantages panels considered manufacturability and ease of attachment. On the surface of the wall mounted frame of drevyannyh frames sizes 50 to 50 mm, the so-called crate. The distance between the bars must not exceed half. reinforced beams at right angles to send the panels, which will be mounted. Establishes panel for the hook – petal through skrepok on a crate. She was part of the next panel, called the comb, placed in the slot is already attached panel. And enshrined in the same manner as the previous one. The result is a whole wall. Moldings, curly pasting nalichniki will end details.

But lining the wall panels to be carried out not by way of slot-toothed comb, a system slot-slot. In this case, with two panels have special fixing cracks. As a result, panel mounted between them using rasshivok, zavodimyh slots in the panels.

By type panel can be divided into leaf, mosaic, nabornye. Leaf panels constitute a single sheet is attached to the surface of the wall using special liquid nails. Mosaic wall panels represent the plate in the form of a square, collected as a mosaic. Nabornye wall panels look like rectangular and mounted between them on the way of slot-toothed comb.