-
What should I know when choosing new kitchen interior
November 10th, 2008
Earlier, during the communist time required great ingenuity to deploy rationally in a room of 5-6 square meters standard components of kitchen furniture and household appliances of different sizes. Now, when there were many choices of a fully complete kitchen, you have to become a specialist – and designer and analyst and marketolog.
So what and how you choose if you decided to kitchen from zero?
The demand for kitchen is best to start by drawing the project for the future interior. Must accurately know the configuration and size of the room (the length of each wall, ceiling height, size of the issued and niche sites), clearly imagine how in this interior will deploy furniture and equipment. And in order to make mebelniya shop worth visiting specialized magzin for household appliances.
“Embedded” or “solo” performance (nevgradena)
After I decided to buy a new kitchen, the first thought about exactly over it. Either version have their advantages and less. Today built-in version produced almost all types of household kitchen equipment: refrigerators, cooking stoves, ovens, sadomialni machines, microwave ovens, aspiration and even parovarki and kafevarki. The selection of technique nevgradena or embedded as dependent on the size of the kitchen, and by its stilovo decision, as well as financial capacity (built-in kitchens are usually 1.5 – 1.7 times more expensive) and what plan To use a long time – art or mebelite.Osnovnoto advantage of solovata (nevgradenata) technique consists precisely in its autonomy and independence from specific components of kitchen furniture.
Embedded equipment can not simply just to shuffle round and more complex it will change if at some point start to like it.
But embedded devices have their advantages over nevgradenite. For example, ordinary cooker is not desirable to put in close proximity to the furniture. Oven can damage the walls of neighboring cabinets, and furthermore there is the view that it is not safe. Design, in order placement in Racks, built equipment is ventilated bottom and the hull is equipped with better insulation.
Household appliances have embedded rate corresponding to the standard cabinets (in most cases the width is 60 or 90 centimeters), while the technology not for incorporation, not always included in the established framework. Height and depth of nevgradenata technique may be somewhat different from the external dimensions of the furniture located next to her. Kitchen has another advantage – the lack of rent and luftove between elements of the set covered by a plot.
In case if you have important overall design of the kitchen, but you do not want themselves to do so on your taste preference will be onboard equipment. For example, most embedded aspiratori have decorative piping made of the same material from which made the facades of the upper and lower cabinets.
From what has been the kitchen
Weather service of kitchen furniture depends on what materials were used in its preparation as materials for the body in the manufacture of kitchen is used (in order of price nishodyasht) tree, Multiplex, MDF and DSP. For the manufacture of kitchen furniture is used more than 40 species of wood. If the kitchen is full of wood, it passes through massive expensive invasive treatment with special substances, including antiseptitsi and covered with a special lacquer. To natural materials can otnesem and Multiplex. So called thin layers of different wood tree species, sticking in different directions. This material is more durable impact on the water than solid wood and practically not distorted.
Most often setting up of kitchens using modern DSP, MDF and other boards. Laminated DSP needs no introduction. Its popularity is due to its relatively low price and its acceptable quality. If funds allow, best to choose MDF (MDF – Medium Density Fiberboard) as a safe and environmentally friendly material. In the production of fine furniture MDF panels capable of processing. They may give any form. From matova covered with varnish or laminated MDF plane often make the facades of kitchens with different decorative Curbs.
As a material for the working surfaces – plots, except those materials are used and natural, synthetic and artificial stones. Increasing popularity gets korianat – high-tech material created on the basis of ACRYLIC napalnitel resin with mineral pigments. He is healthy, sustainable chemical reactions and is not harmful. And by the by mramornite plots in all their subtlety and modnost are sensitive to acids and, as it is strange, fragile – they may even propukat razlyata hot water over them.
Questions that you set when purchasing kitchen
If you’ve decided to stop to the kitchen, the next question is: should you buy furniture and equipment from one location.
Today furniture salons often offer a certain range technology for incorporation by several manufacturers. On the one hand, of course, faster and more convenient all problems can be solved by one company. Assembly of furniture and installation of the equipment will perform the same people in this moderate to pay and if something unpleasant happens, who will have to look for blame. However, in the purchase of ready built-in kitchen equipment with a large degree of probability can be unpleasant encounter with two things:
with a limited selection of models with high price.
Typically, manufacturers and sellers of furniture have established relationships with certain suppliers of equipment and so far not offered by all manufacturers. But even if you completely ustroyva technique, which was completed kitchen that you like, worth prior to visit a specialized shop to target prices. As competition in the kitchen is very large proportion of companies zalagva buyers with low value of their furniture, but at the same time as “burdensome” cost of onboard equipment.
How to deploy the kitchen
Okomplektovaneto of kitchen equipment with built-in gives opportunities for the realization of various design ideas. In this should not be overlooked some general recommendations.
For example, next to the stove or built-in oven inferior cabinet not to sink, sadomialna machine or built-in refrigerator. It is better between them to provide even tesnichko 30-cm with locker doors or pull-outs.
Traditionally, incorporation equipment is placed in the lower cabinets of the set. In such a situation is save space. If your kitchen can not be called small, is not zadalzhitellno to deploy all the equipment below. Much more convenient to place equipment for the preparation of food at eye level, to monitor the process more convenient.
Ovens, microwave ovens, and kafevarkite parovarkite often vgrazhdat in high cabinets, with special columns isolated places for engineering.
If you more to be desired about the size of your kitchen, then in that case you can save space by moving work surfaces to which they relate board-mounted tables with their mobile baskets for kitchen utensils, corner mobile elements, “raftove – Roundabouts With a few container, metal grids of different sizes, which can be filled mobile columns.
Helps D-form configuration of the kitchen sets. In such cases it is convenient, for example, to deploy a built-in corner cabinet with oven below (in the case of “solova” fire can not put it in the corner)
If all members of your family have high growth, the kitchen can be placed on the podium. Standard furniture intended for women with height 160 cm and for many people is extremely uncomfortable to use the sink to the women 160 cm in height They should rather be bowed.
